When there are flashing signals at a railroad crossing and the train clears the crossing?
When there are flashing signals at a railroad crossing and the train clears the crossing? At a railroad crossing with flashing lights and lowered gates, always wait until the lights stop flashing and the gates are up completely before proceeding. At a railroad crossing that has only a crossbuck, wait long enough after the train passes to get a clear view in each direction before proceeding.
When approaching a railroad crossing with flashing lights motorists must do what?
Near Railroad or Light Rail Tracks You may drive faster than 15 mph if the crossing is controlled by gates, a warning signal, or a flagman. At railroad or train crossings: Flashing red warning lights indicate you must stop and wait.
What does a red signal on a train mean?
Some are common, others are unique to a specific railroad. The most constant signals and the easiest to understand are single-head block signals. Red means stop; green means proceed, and yellow means caution or approach, usually indicating that the next signal is red.
What should you not be doing when you are approaching a railroad crossing?
The FRA offers the following additional tips for motorists when approaching a crossing: Never ignore flashing lights, whistles, closing gates or stop signs. Slow down, look in both directions, and test your brakes. Be certain you don't see a train.
Which of the following may indicate a railroad crossing?
A crossing signal system includes flashing red lights and may have a gate with red flashing lights that are activated when a train is nearby. Railroad crossings have pavement markings that include a large X with the letters RR. Only cross the tracks if you are sure you can completely clear the crossing.
How do you know when a train is coming?
Red flashing lights and gates Many crossbuck signs have red lights and bells attached. Some even have gates which cross the traffic lane. If the lights begin to flash or the bells begin to ring, STOP! A train is coming.
What do flashing lights at a railway crossing indicate?
Red flashing lights and gates Many crossbuck signs have red lights and bells attached. Some even have gates which cross the traffic lane. If the lights begin to flash or the bells begin to ring, STOP! A train is coming.
What should you do if you are approaching train tracks and there are red flashing lights or descending gates how far away?
Below are some safety tips everyone should keep in mind while near a train track: Red lights indicate a train is approaching from either direction. Never walk around or behind lowered gates at a crossing and do not cross the tracks until the lights have stopped flashing. Stay alert around railroad tracks.
How many feet must you stop from the nearest railroad crossing?
Except in cities or towns, whenever any person driving a vehicle approaches a railroad grade crossing under any of the circumstances stated in this section, the driver of the vehicle shall stop within 50 feet but not less than 15 feet from the nearest rail of such railroad, and shall not proceed until he can do so ...
What is the first warning of an approaching train at a crossing?
Advance warning signs The advance warning sign is a round, yellow sign bearing the lettering RXR. The X is very large, covering the full diameter of the sign. It is usually the first warning you will see that you are approaching a railroad crossing. Slow down, look and listen for an approaching train.
How many feet away should a car stop from the nearest rail of a railroad crossing?
Stop at least 20 feet, but no more than 50 feet, from the nearest track. Always stop if you see a train coming or you hear the whistle, horn, or bell of an approaching train. Never go under lowering gates or around lowered gates. Flashing red warning lights indicate you must stop and wait.