What was the biggest obstacle in the way of building the transcontinental railroad?
What was the biggest obstacle in the way of building the transcontinental railroad? Builders of the transcontinental railroad faced geographical obstacles across the entire line. But none were quite as formidable as the snowy granite mountain range rising east of Sacramento. Getting through the Sierra Nevada would require fortitude, technology -- and the sacrifice of many workers' lives.
Was it hard to build the transcontinental railroad?
The work was tiresome, as the railroad was built entirely by manual laborers who used to shovel 20 pounds of rock over 400 times a day. They had to face dangerous work conditions – accidental explosions, snow and rock avalanches, which killed hundreds of workers, not to mention frigid weather.
Who provided most of the difficult labor for the transcontinental railroad?
Chinese workers made up most of the workforce between roughly 700 miles of train tracks between Sacramento, California, and Promontory, Utah. During the 19th century, more than 2.5 million Chinese citizens left their country and were hired in 1864 after a labor shortage threatened the railroad's completion.
What were two major impacts of the Transcontinental Railroad?
The Transcontinental Railroad reduced travel time from New York to California from as long as six months to as little as a week and the cost for the trip from $1,000 to $150. The reduced travel time and cost created new business and settlement opportunities and enabled quicker and cheaper shipping of goods.
What was a negative impact of the transcontinental railroad?
But there was also a dark side to the historic national project. The railroad was completed by the sweat and muscle of exploited labor, it wiped out populations of buffalo, which had been essential to Indigenous communities, and it extended over land that had been unlawfully seized from tribal nations.
What caused the railroads to fail?
But the Depression, and the switch to automobiles after World War II, dealt a blow from which the railroads still have not recovered. A deadly cycle set in. As the number of passengers using the trains decreased, causing revenues to fall, the railroads tried to survive by cutting back on maintenance and service.
What natural obstacles slowed the building of the transcontinental railroad?
The Sierra Nevada, the 400-mile-long range of granite peaks that form the backbone of California, was the most formidable obstacle in the construction of the Transcontinental Railroad. The only way past them was through. But in the mid-1860s, an era without dynamite or heavy machinery, the task seemed unsurmountable.
How was the railroad corrupt?
Railroads Were at the Forefront of Political Corruption “Railroads need monopoly franchises and subsidies, and to get them, they are more than willing to bribe public officials,” White says. The Central Pacific Railroad, for example, spent $500,000 annually in thinly disguised bribes between 1875 and 1885.
Was the transcontinental railroad a positive or a negative?
Good and bad The railroad is credited, for instance, with helping to open the West to migration and with expanding the American economy. It is blamed for the near eradication of the Native Americans of the Great Plains, the decimation of the buffalo and the exploitation of Chinese railroad workers.
What was the biggest obstacle for the railroads heading east from California?
The Sierra Nevada, the 400-mile-long range of granite peaks that form the backbone of California, was the most formidable obstacle in the construction of the Transcontinental Railroad.
What was an obstacle during the construction of the transcontinental railroad?
Each company faced unprecedented construction problems—mountains, severe weather, and the hostility of Native Americans. On May 10, 1869, in a ceremony at Promontory, Utah, the last rails were laid and the last spike driven.
In what two 2 ways did railroads affect the economy?
Railroads became a major industry, stimulating other heavy industries such as iron and steel production. These advances in travel and transport helped drive settlement in the western regions of North America and were integral to the nation's industrialization.
What are 5 facts about the transcontinental railroad?
- It was built to connect the United States' East and West Coasts. ...
- Approximately 1,800 miles of track. ...
- The transcontinental railroad cost roughly $100 million. ...
- Workers came from a wide range of backgrounds and ethnicity. ...
- President Abraham Lincoln signed the Pacific Railway Act.
What were the social effects of the transcontinental railroad?
The completion of the transcontinental railroad led to heightened racial tensions in California, as white workers from the East Coast and Europe could more easily travel westward where immigrant laborers were prevalent, says Princeton University Assistant Professor of History Beth Lew-Williams, author of The Chinese ...
How did the Transcontinental Railroad affect slavery?
Before, during and after the transcontinental railroad's construction thousands of enslaved and then freedmen worked on the railroads grading lines, building bridges, and blasting tunnels. They working as firemen shoveling coal into the boiler riding alongside the engineer, and as brakemen and yard switchmen.
What type of failures occur in the rail?
Rail defects can be roughly categorized into abrasion (loss of material through friction), deformation, fatigue and machining errors. The maintenance procedure used – grinding or milling – depends not only on the type of defect, but also on its severity.