What is the purpose of the wall in a castle?
What is the purpose of the wall in a castle? It protected the keep and the bailey from attack. There were only a few doors in the walls around the castle, and they were usually very tall so that attackers couldn't climb over them! The motte was a mound of dirt that the castle sat on. It made it harder for people to attack and was also great as a look-out point.
How did they keep castles warm?
Castles weren't always cold and dark places to live. But, in reality, the great hall of castle had a large open hearth to provide heat and light (at least until the late 12th century) and later it had wall fireplace. The hall would also have had tapestries which would have insulated the room against too much cold.
How tall were castle walls usually?
Some later medieval castles had walls that were only about 15 to 20 feet (4.6 m to 6 m) high, but the walls of the stronger castles typically measured about 30 feet (9 m) in height and sometimes more. e wall of Eng- land's Framlingham Castle reached 40 feet (12 m) above the ground.
What makes a castle strong?
Build thick walls and battlements The castle also has high 'curtain walls' which protect the castle's inner and outer 'wards' or 'baileys'. These are the courtyard areas inside the walls where important buildings like the keep, or perhaps stables and storehouses would have been built.
Why do castles have teeth?
These upright projections resemble teeth, bared at invaders to prevent their attempted entries and at allies to show the owner's strength.
Why did castles have high walls?
If attackers managed to break through this outer ring of defense, castle defenders could retreat behind high inner walls. Corner towers stood out from the walls, giving defenders a better perspective on enemy movements. Windows were rare; instead, slits called loopholes were built for archers.
What is the first room in a castle called?
The great chamber was at the dais end of the hall, usually up a staircase. It was the first room which offered the lord of the household some privacy from his own staff, albeit not total privacy. In the Middle Ages the great chamber was an all-purpose reception and living room.
What is the weakest part of any castle?
The Gate. The entrance was often the weakest part in a castle. To overcome this, the gatehouse was developed, allowing those inside the castle to control the flow of traffic. Gatehouses were inside the wall and connected with the bridge over the moat, but they were more than just doorways.
Are there bathrooms in castles?
The toilets of a castle were usually built into the walls so that they projected out on corbels and any waste fell below and into the castle moat. Even better, waste went directly into a river as is the case of the latrines of one of the large stone halls at Chepstow Castle in Wales, built from the 11th century CE.
Why do castles have secret rooms?
These were often used as a means of escape or as a way to move around the castle undetected. The secret passages could be used as an escape route in case of a siege or an invasion, or as a way to move around the castle without being seen by enemies.
When did castle walls become obsolete?
The Early Middle Ages saw the creation of some towns built around castles. Medieval-style fortifications were largely made obsolete by the arrival of cannons in the 14th century.
What is the most vulnerable part of a castle?
As the gate is always a vulnerable point of a castle, towers may be built near it to strengthen the defences at this point. In crusader castles, there is often a gate tower, with the gate passage leading through the base of the tower itself.
What is the most important room in a castle?
The most important room in a castle was the Great Hall. This is where all the members of the household sat down to eat at tables set up for every meal. It was where feasts were held for special days, or when there were guests. King Arthur's Pentecost Feast takes place in such a Hall.
Do castles have toilets?
In the medieval period luxury castles were built with indoor toilets known as 'garderobes', and the waste dropped into a pit below.
What are the holes in castle walls called?
An arrowslit (often also referred to as an arrow loop, loophole or loop hole, and sometimes a balistraria) is a narrow vertical aperture in a fortification through which an archer can launch arrows or a crossbowman can launch bolts.
How thick were castle keep walls?
The height of walls varied widely by castle, but were often 2.5–6 m (8.2–19.7 ft) thick. They were usually topped with crenellation or parapets that offered protection to defenders.