What is the difference between Cat 1 and Cat 2 ILS?
What is the difference between Cat 1 and Cat 2 ILS? CAT I relies only on altimeter indications for decision height, whereas CAT II and CAT III approaches use radio altimeter (RA) to determine decision height.
Can a VFR pilot fly ILS?
When flying under VFR rules, you can use an ILS to help guide you to land. Typically, at an airport with an ILS, you cannot just jump onto it yourself when flying under VFR rules, but instead you can request Approach / Tower, that as VFR, for premission to fly a Practice ILS approach under VFR flight rules.
What does cat 2 mean in aviation?
(ii) Cat II Operation: A precision instrument approach and landing with a decision height lower than 60m (200ft) but not lower than 30 m (100ft) and a runway visual range not less than 350m.
Can I land my Cessna at any airport?
Yes, private planes are allowed to land at public airports. Many private pilots choose to land at public airports instead of private ones due to their convenient locations and availability of services. Private planes may often land at public airports for various reasons.
Do pilots always use reverse thrust when landing?
Although most airlines deploy thrust reversers on every landing, the level of reverse thrust used is left to the pilots discretion. Most airlines instruct their pilots to put the reverser into idle reverse whether he intends to use the reverser or not.
Why do pilots reject landings?
Discussion: In some cases pilots may need to reject a landing due to rapidly deteriorating weather conditions which reduce the visibility required for a safe landing.
Do pilots land hard on purpose?
In some situations, such as during a landing on a contaminated runway, the firm touchdown may have been intentional. As stated in the definition above, a hard landing is classified as the exceedance of a manufacturer limitation, which will vary by the category and purpose of the aircraft.