What is required for a CAT 2 approach?
What is required for a CAT 2 approach? The minimum for ILS approaches to CAT II runways is 100 feet DH/RVR 1200, regardless of published lower minimums. Passengers or property cannot be carried for compensation or hire. The LOA requires an operational check of the ILS equipment within the last 15 flight hours and 15 calendar days before flight.
What is the 321 rule for IFR?
It's called the 3-2-1 rule, and it's the easiest way to remember the regulation. To recap, if the weather at your destination isn't at least 3 SM of visibility and 2000' AGL ceilings from 1 hour before to 1 hour after your ETA, you need to file an alternate.
What is the cat 2 ILS criteria for instrument runways?
(ii) Cat II Operation: A precision instrument approach and landing with a decision height lower than 60m (200ft) but not lower than 30 m (100ft) and a runway visual range not less than 350m.
What is the difference between Cat 1 and Cat 2 ILS?
CAT I relies only on altimeter indications for decision height, whereas CAT II and CAT III approaches use radio altimeter (RA) to determine decision height.
What equipment is required for the ILS approach?
What equipment do you need on the aircraft? The localizer uses radio frequencies just like a VOR does, so all you need are standard VHF (Very High Frequency) radio receivers. The glideslope requires a UHF (Ultra High Frequency) receiver.
What are the 3 main IFR approaches?
- Non-precision approach (NPA) procedure.
- Approach procedure with vertical guidance (APV)
- Precision approach (PA) procedure.