What does the color of the line mean on Flightradar?
What does the color of the line mean on Flightradar? The color of the trail behind the aircraft differs depending on the altitude the aircraft had at that position. The numbers are in meters. If the aircraft is below 100 meters in altitude, the trail will be white. If it is above 100 meters, the trail will yellow, and with increase in altitude, will be green and so on.
What does a dotted line on flight tracker mean?
Dotted line is potential path. Usually flights over oceans are out of reach. Some of them are tracked by satelites.
Why does a plane say blocked on Flightradar24?
It appears as BLOCKED due to security and privacy reasons. Aircraft type - (It will only show the 'type code' [LJ35,C750,PA31,etc)] of the aircraft on flightradar24 map. Blocked - Any aircraft without any type codes in the database.
How do you identify an aircraft on radar?
- By use of Transponder (SSR). For example, by: ...
- By comparing the reported position of the aircraft with the radar response;
- By observing the response of the aircraft to a request to turn onto a specified heading;
- By transfer of radar identification.
What is a squawk code in aviation?
Squawk codes are what air traffic control (ATC) use to identify aircraft when they are flying. They are unique four-digit numbers and range from 0000 to 7777; some of which are fixed values signifying specific scenarios (see below), others being randomly generated by ATC.
What do the purple lines mean on flightradar24?
On the map a coloured line shows the route of the aircraft. Purple colours indicate cruising altitudes. White colours indicate the plane is on the ground. As a plane takes off, the colours change from white, to yellow, to green, to light blue, to dark blue and finally to purple.
What is a 7700 Squawk?
A Squawk 7700 indicates an emergency. This can be an emergency of any kind. Pilots may input it into the transponder themselves – or when instructed to do so by ATC. As a result, ground control will know that the aircraft is dealing with a serious issue and needs help.
What is the color code for flight radar?
Flightradar24 Support center Below are the meanings behind these colors: Gray: The flight is scheduled and there isn't an additional status available. Green: The flight is estimated to be on time or arrived at time. Orange: The flight is estimated to be delayed or was delayed.
What do flight statuses mean?
The status of a flight can be one of the following. Scheduled: Flight is not airborne. Departure and arrival times are according to airline's schedule. Delayed: Flight will depart 15 or more minutes after its scheduled departure time. Departed: Flight has left the departure gate but may not be airborne yet.
What are the lines on Flightradar24?
On the map a coloured line shows the route of the aircraft. Purple colours indicate cruising altitudes. White colours indicate the plane is on the ground. As a plane takes off, the colours change from white, to yellow, to green, to light blue, to dark blue and finally to purple.
What does squawk 7500 mean?
The first emergency code that you may have become familiar with is Squawk 7500. This code is used to indicate that the aircraft has been hijacked, and therefore requires urgent emergency support from both security services and air traffic control.
How accurate is Flightradar24?
The position is calculated based on many different parameters and in most cases it's quite accurate, but for long flights the position can in worst cases be up to about 100 km (55 miles) off. In settings there is an option to set for how long time you want to see estimated aircraft on map.
What is the blue arrow on Flightradar24?
Hi Damaris, the blue arrow indicates your direction of view or movement.
What does blue vs yellow mean on Flightradar24?
Aircraft located using satellite data are coloured blue on the map, and yellow if located by terrestrial receivers.
What is the GREY line on Flightradar24?
A note about Estimated coverage: when you see a dashed or gray line behind an aircraft, that's estimated coverage. Colored lines indicate actual positions. When an aircraft is out of coverage, we estimate based on great circle routes to destination.