What does purple line on flight radar mean?


What does purple line on flight radar mean? On the map a coloured line shows the route of the aircraft. Purple colours indicate cruising altitudes. White colours indicate the plane is on the ground. As a plane takes off, the colours change from white, to yellow, to green, to light blue, to dark blue and finally to purple.


What do blue and yellow planes mean on Flightradar24?

Flightradar24 is the first flight tracking service which offers space-based ADS-B-tracking. The blue planes on the map are tracked from a satellite and the yellow ones are tracked from the regular earth-based radar stations.


How do I see most tracked planes on Flightradar24?

Print. To access the “Most tracked flights” section on our mobile app, you should place your finger just under the top search bar and swipe down. Then more info will be revealed and you will be able to see the “Most tracked flights” tab there as well.


What is the black line on Flightradar24?

If the aircraft's position surpasses 2500 meters in altitude, the trail will be light blue, and will then change to dark blue, purple and finally red for the highest possible altitude. If the trail is a black dotted line, the aircraft is outside our coverage area and its position is being estimated.


What is considered a general emergency in flightradar24?

This is the code for a general emergency. 7700 can be entered into the transponder for a variety of reasons, and some of the most common include medical emergencies, engine failure, problems with pressurization or landing gear, issues with flight control, and more.


How do you identify an aircraft on radar?

Radar identification may be carried out in several different ways:
  1. By use of Transponder (SSR). For example, by: ...
  2. By comparing the reported position of the aircraft with the radar response;
  3. By observing the response of the aircraft to a request to turn onto a specified heading;
  4. By transfer of radar identification.


What is the color code for flight radar?

Flightradar24 Support center Below are the meanings behind these colors: Gray: The flight is scheduled and there isn't an additional status available. Green: The flight is estimated to be on time or arrived at time. Orange: The flight is estimated to be delayed or was delayed.


What do the lines mean in flight tracker?

A note about Estimated coverage: when you see a dashed or gray line behind an aircraft, that's estimated coverage. Colored lines indicate actual positions. When an aircraft is out of coverage, we estimate based on great circle routes to destination.


What are the lines on Flightradar24?

On the map a coloured line shows the route of the aircraft. Purple colours indicate cruising altitudes. White colours indicate the plane is on the ground. As a plane takes off, the colours change from white, to yellow, to green, to light blue, to dark blue and finally to purple.


What does squawk 7500 mean?

The first emergency code that you may have become familiar with is Squawk 7500. This code is used to indicate that the aircraft has been hijacked, and therefore requires urgent emergency support from both security services and air traffic control.


How accurate is Flightradar24?

The position is calculated based on many different parameters and in most cases it's quite accurate, but for long flights the position can in worst cases be up to about 100 km (55 miles) off. In settings there is an option to set for how long time you want to see estimated aircraft on map.


What is the purple line on the flight tracker?

A purple line on an aeronautical chart typically indicates an airway, which is a defined route through the airspace that connects two navigation aids, such as VOR (Very High Frequency Omnidirectional Range) stations. Air traffic controllers use airways to route aircraft along designated paths in the sky.


Why do planes squawk 7700?

The most well know of these is the code 7700. This is used to indicate an emergency of any kind. A pilot will enter this when in an emergency situation - either instructed by ATC after declaring an emergency or without communication if there is no time.


What does purple airspace mean?

However, in some aeronautical charts, a purple line can indicate a special use airspace boundary. Special use airspace refers to certain areas of airspace where activities such as military operations, air shows, or unmanned aerial vehicle (drone) operations may take plac.


What does a red plane mean on flightradar24?

Red: When an aircraft is displayed as red that means that you are currently following that specific aircraft on the map or that the aircraft's transponder is squawking an emergency code. These codes are 7500 (Hijack), 7600 (Communication Equipment Failure), 7700 (General Emergency)


What is the most viewed flight in Flightradar24?

From the time it lifted off from Kuala Lumpur at 15:42 local time, SPAR19 was already the most tracked flight on Flightradar24 among active flights. By the time it landed in Taipei, SPAR19 was being tracked by more than 708,000 people around the world, making it the most tracked live flight in Flightradar24 history.


Do fighter jets appear on Flightradar24?

Generally, aircraft requesting that they not be displayed on Flightradar24 are military aircraft. Some military aircraft, such as various transport aircraft, are visible. How do I see only a military plane on Flightradar24? In Flightradar24, you normally cannot see military planes, they're filtered out.


What is squawk 7500 on flightradar24?

Famous Squawk codes These special codes are standardized by the International Civil Aviation Organization (ICAO), so seeing an emergency code in Denver means the same thing as seeing the code in Delhi. The first of these is the code 7500, which signals “unlawful interference,” more commonly referred to as hijacking.