How often did steam locomotives have to stop for water?


How often did steam locomotives have to stop for water? During the very early days of steam locomotives, water stops were necessary every 7–10 miles (11–16 km) and consumed much travel time. With the introduction of tenders (a special car containing water and fuel), trains could run 100–150 miles (160–240 km) without a refill.


How did steam engines not run out of water?

Water Troughs These troughs allowed train crews to replenish the water supplies of their locomotives without having to stop the train. As the locomotive reached the start of the water trough (usually indicated by a track side marker board), the fireman would lower a scoop into the trough.


Do steam trains refill water?

A water stop or water station on a railroad is a place where steam trains stop to replenish water. The stopping of the train itself is also referred to as a water stop. The term originates from the times of steam engines when large amounts of water were essential.


Do steam trains run in the rain?

Of course they do! Trains have windshield wipers the same as cars do, and generally speaking, the rain isn't enough to short the electrical motors on their own. The worst case scenario is that if the rains are hurting visibility, the trains might slow down so to not over run a signal.


How did they fill water tanks for steam trains?

Stations and towns along the line had large water tanks, high above the track, so trains could pull underneath and fill up. These water tanks were filled either by trains that carried extra water in special cars, or by long-distance underground pipelines.


Can you drink train water?

So they err on the side of caution, and instruct you not to drink the water, because they can't guarantee that it's potable. Even if the water is great when it goes in, it sits around in an unrefrigerated tank that doesn't get a thorough cleaning every day. That alone is enough to disqualify it for drinking.


How much water does a steam locomotive use per hour?

An A4 Pacific locomotive running uphill with an express train was generating a drawbar horsepower of between about 1200 to 1300 horsepower. (Allen, 1950, Table 50, p xl). So an A4 Pacific running under these conditions was using between about 30000 and 32000 lb of water per hour (13.6 to 14.5 tonnes per hour).


Do steam trains reuse water?

Steam locomotives exhausted to the atmosphere so water had to be constantly replenished. Over the course of a route, considerable variations in water quality were found, creating different types of incrustation. The problems were less with land boilers as the feedwater was constantly recycled.


What happens to the toilet water on a train?

Some trains may have composting toilet tanks, which use bacterial action to break down solid and liquid waste. Only the broken down clean liquid is released to the trackbed after sterilisation. The solid waste only has to be emptied every half year.


What is the lifespan of a steam locomotive?

Many locomotives can last 30–40 years, depending on the maintenance done on them. Our GG1 Lasted 41 years, but many of the steam locomotives were retired early. So they had years left in them, but the company did not want to run steam anymore, so they were retired early.


How far could a steam locomotive go before needing coal?

By the late steam era (1930s-1940s) a locomotive used in main line service could run anywhere between 75 to 150 miles before needing to refuel, which typically coincided with a train crew's district/territory.


Do steam trains have toilets?

Actually they did, except for the oldest. In the earliest years of steam railways trains did stop frequently, so all the facilities could be found at the station: Toilets, refreshments, sale of meals into the train. As the trains went on longer distances with fewer, shorter stops, they also had toilets installed.


What was the fastest steam train ever?

On 3 July 1938, Mallard claimed the world speed record for steam locomotives at 126 mph (203 km/h) during a trial run of a new, quick-acting brake, known as the Westinghouse QSA brake.